HAND TOOLS REQUIRED FOR THE GM-ASEP PROGRAM
A comprehensive list of hand tools is provided below. All tools are to be provided by each student. Please keep in mind that Delaware Tech does not sell tools. The College does, however, invite tool manufacturer representatives to demonstrate their products to our GM ASEP students during the first week of class. Students may purchase tools from any vendor or manufacturer, but they must deal directly with the tool representatives. Also, students are under no obligation to buy tools from any particular vendor. The purchase of tools is a matter of personal preference.

GM ASEP students are required to purchase or have their tools during their first week of class. Students cannot complete their lab assignments, or go to work at their sponsoring dealership without a set of tools.

1. Tool Chest or Tool Box
2. 1/4" Drive Set: 1/4" - 1/2" U.S. Standard Depth
   1/4" - 1/2" U.S. Deep
   4 mm - 12 mm Metric Standard Depth
   4 mm - 12 mm Metric Deep
   Flex/Universal Type
   3", 6" Extensions
   Ratchet
3. 3/8" Drive Set: 5/16" - 3/4" U.S. Standard Depth (6 point)
   3/8" - 3/4" U.S. Deep (6 point)
   9 mm - 19 mm Metric Standard Depth
   9 mm - 19 mm Metric Deep
   Spark Plug Sockets 5/8", 13/16"
   Flexible Socket Set 3/8" - 3/4"
   Flexible Socket Set 9 mm - 19 mm
   Universal Joint
   3", 6", 12", 18" Extensions
   Speed Handle
   Flexhead Ratchet
   Ratchet
   Adapter 3/8" to 1/4"
   Adapter 3/8" to 1/2"
   Sockets for GM Oil Pressure Sending Unit
   Torx Bit Set
4. 1/2" Drive Set: 7/16" - 1-1/8" U.S. Standard Depth
   7/16" - 1-1/8" U.S. Deep
   10 mm - 25 mm Metric Standard Depth
   10 mm - 25 mm Metric Deep
   3", 6", 12" Extensions
   Flex Handle Ratchet
5. Combination Wrench Set: 1/4" - 1-1/4" Standard
6. Combination Wrench Set: 4 mm - 19 mm Metric
7. Torque Wrenches: 3/8" Drive, 30-250 lb in
   3/8" Drive, 5-75 lb ft
   1/2" Drive, 50-250 lb ft
8. Crowfoot Wrench Set, U.S.
9. Crowfoot Wrench Set, Metric
10. Line Wrench Set: 1/4" - 3/4" Standard
    10 mm - 17 mm Metric
11. Allen Hex Wrench Set, Standard
12. Allen Hex Wrench Set, Metric
13. Adjustable Wrench
14. Pliers: Combination 6"
    Hose Clamp
    Vice Grip
    Needle Nose 6"
    Side Cutting
    Slip Joint (Water Pump)
15. Screwdriver Set, Straight Blade
    
16. Screwdriver Offset, Straight Blade
    
17. Screwdriver Set, Phillips
    
18. Screwdriver Offset, Phillips
    
19. Screwdriver Posidrive Set: #1, #2, #3, #4
    
20. Screwdriver Torx Set: T-8, T-10, T-15, T-20, T-25,
    T-27, T-30, T-40, T-50, T-55
    
21. Screw Starter, Straight Blade
    
22. Screw Starter, Phillips
23. Hammers: 16 oz Ballpeen
    16 oz Plastic Tip
    Brass
    Dead Blow Plastic Mallet
    Rubber Mallet
    
24. Punch Set: Center
    Brass Drift
    Pin 1/8", 3/16", 1/4", 5/16"
    Taper 3/8", 1/2", 5/8"
    
25. Chisel Set: Cape 5/16"
    Cold 3/8", 3/4"
26. File Set with Handles: Course 6", 12"
    Fine 6", 12"
    Half Round 12"
    Round 6", 12"
27. Hacksaw
    
28. Valve Core Tool
29. Brake Spoon (Adjustment Tool)
30. Brake Spring Installers
31. Brake Pliers
32. Battery Terminal Pliers
33. Battery Terminal Pullers
34. Battery Terminal Cleaner
35. Feeler Gauge, Standard .002" - .040"
36. Feeler Gaug, Metric .006 mm - .070 mm
37. Spark Plug Feeler Gauge (Gap Tool)
38. Carbon/Gasket Scraper
39. Scribe
40. Wire Brush
41. Air Blow Gun (OSHA approved)
42. Magnetic Pickup Tool
43. Flexible Pickup Tool
44. Inspection Mirror
45. Flashlight
46. Safety Glasses, Goggles
47. Tape Measure, 6 ft.
48. Tire Pressure Gauge
49. Antifreeze Tester
50. Battery Tester (Hydrometer)
51. Test Light (12V)
52. Digital Volt Ohm Multimeter